TP-Link TL-WDR3600 manual Bandwidth Control, System Routing Table

Models: TL-WDR3600

1 145
Download 145 pages 7.28 Kb
Page 109
Image 109
4.16.2 System Routing Table

TL-WDR3600N600 Wireless Dual Band Gigabit Router

Click the Enable All button to enable all the entries.

Click the Disable All button to disable all the entries.

Click the Delete All button to delete all the entries.

Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen.

4.16.2 System Routing Table

Choose menu “Advanced Routing → System Routing Table”, and then you can view the System Routing Table in the next screen (shown in Figure 4-98). System routing table views all of the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface will be displayed for each entry.

Figure 4-98 System Routing Table

Destination Network - The Destination Network is the address of the network or host to which the static route is assigned.

Subnet Mask - The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion.

Gateway - This is the IP address of the gateway device that allows for contact between the Router and the network or host.

Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN (internal wired and wireless networks), or on the WAN (Internet).

4.17 Bandwidth Control

Figure 4-99 Bandwidth Control

- 99 -

Page 109
Image 109
TP-Link manual Bandwidth Control, System Routing Table, TL-WDR3600 N600 Wireless Dual Band Gigabit Router