TP-Link TL-WDR3600 manual To set up your FTP Server, please follow the instructions below

TL-WDR3600N600 Wireless Dual Band Gigabit Router

Figure 4-55 FTP Server Configuration

Service Status - Indicates the FTP Server's current status.

Internet Access - Select enable to allow access of the FTP server from the Internet. Otherwise, select disable to only allow local network access.

Service Port - Enter the FTP Port number to use. The default is 21.

Name - This folder's display name.

Partition - The volume that the folder resides. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2.

Folder - The real full path of the specified folder.

To set up your FTP Server, please follow the instructions below:

1.Plug an external USB hard disk drive or USB flash drive into this Router.

2.Click the Enable/Disable radio box to enable/disable Internet access to FTP from Internet port.

3.Specify a port for the FTP server to use (The default port number is 21).

4.The Internet Address displays the WAN IP address of this router, so that other users can access FTP via this address.

5.If WAN type is PPPoE/PPTP/L2TP, two connections will be available. Therefore, users can access FTP server via two connections. Users in a private LAN can access ftp server via Public Address while Internet users can access ftp server via Internet Address.

6.Click the Start button to start the ftp server.

To add a new folder, follow the instructions below.

1.Click Add New Folder in Figure 4-55.

- 66 -