TP-Link manual ARP List, TL-WDR3600 N600 Wireless Dual Band Gigabit Router

TL-WDR3600N600 Wireless Dual Band Gigabit Router

2.Enter the MAC Address or IP Address.

3.Click the Find button in the page as shown in Figure 4-106.

Figure 4-106 Find IP & MAC Binding Entry

Click the Enable All button to make all entries enabled.

Click the Delete All button to delete all entries.

4.18.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could also configure the items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding entries (shown in Figure 4-107).

Figure 4-107 ARP List

1.MAC Address - The MAC address of the controlled computer in the LAN.

2.IP Address - The assigned IP address of the controlled computer in the LAN.

3.Status - Indicates whether or not the MAC and IP addresses are bound.

4.Configure - Load or delete an item.

Load - Load the item to the IP & MAC Binding list.

Delete - Delete the item.

Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Binding list. Click the Refresh button to refresh all items.

- 103 -