TP-Link TL-WDR3600 manual Add or Modify Wireless MAC Address Filtering entry

TL-WDR3600N600 Wireless Dual Band Gigabit Router

Figure 4-39 Wireless MAC Filtering

To filter wireless users by MAC Address, click Enable. The default setting is Disabled.

MAC Address - The wireless station's MAC address that you want to filter.

Status - The status of this entry, either Enabled or Disabled.

Description - A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-25:

Figure 4-40 Add or Modify Wireless MAC Address Filtering entry

To add or modify a MAC Address Filtering entry, follow these instructions:

1.Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B.

2.Give a simple description for the wireless station in the Description field. For example: Wireless station A.

3.Select Enabled or Disabled for this entry on the Status drop-down list.

4.Click the Save button to save this entry.

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

-54 -