TP-Link TL-WDR3600 manual Factory Defaults

TL-WDR3600N600 Wireless Dual Band Gigabit Router

3.Click the Upgrade button.

4.The Router will reboot while the upgrading has been finished.

Note:

1)New firmware versions are posted at http://www.tp-link.comand can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the Router rather than the configuration, you can try to upgrade the firmware.

2)When you upgrade the Router's firmware, you may lose its current configurations, so before upgrading the firmware please write down some of your customized settings to avoid losing important settings.

3)Do not turn off the Router or press the Reset button while the firmware is being upgraded. Loss of power during the upgrade could damage the Router.

4)The firmware version must correspond to the hardware.

5)The upgrade process takes a few moments and the Router restarts automatically when the upgrade is complete.

4.21.4 Factory Defaults

Choose menu “System Tools → Factory Defaults”, and then and you can restore the configurations of the Router to factory defaults on the following screen

Figure 4-124 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

The default User Name: admin

The default Password: admin

The default Subnet Mask: 255.255.255.0

Note:

All changed settings will be lost when defaults are restored.

- 118 -