![](/images/new-backgrounds/1195266/19526665x1.webp)
TL-WDR3600 N600 Wireless Dual Band Gigabit Router
Subnet Mask - Enter the subnet Mask in
Default Gateway - (Optional) Enter the gateway IP address in
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP.
Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in
Click the Save button to save your settings.
3.If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you should enter the following parameters (Figure
Figure 4-5 WAN - PPPoE
User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.
Secondary Connection - It’s available only for PPPoE Connection. If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection.
Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended.
-23 -