| Transition Networks |
DIN rail clip and DIN rail mounting
Mounting the The aluminum DIN Rail Clip should already be mounted to the back panel of the
DIN rail clip Device Server. If you need to attach the DIN Rail Clip, position the
DIN rail and device server mounting considerations
Figure 3: Mounted DIN Rail Clip
Consider the following before mounting the DIN rail to a surface and attaching the Device Server:
•The surface must support at least 1,000 gm (2.2 lbs) for the Device Server.
•Do not place heavy objects on the Device Server.
CAUTION
Mount the Device Server with proper spacing around it for ventilation (heat dissipation). Failure to observe this caution could result in damage to the Device Server.
CAUTION
Please exercise caution when using power tools. Do not install this unit in damp or wet locations, or in close proximity to very hot surfaces. Failure to observe this caution could result in damage to the Device Server and cables.
Continued on next page
9 |
