| Transition Networks |
DIP Switches
DIP switch The Device Server features four DIP switches on the top panel that set the responds
position for the alarm in case of power loss or link failure. Figure 14 shows the DIP switch
descriptions and a chart that explains each setting.
No | Description | Default |
1 | Primary power alarm | OFF |
| (enable ON, disable OFF) |
|
2 | Redundant power alarm | OFF |
| (enable ON disable OFF) |
|
3 | Fiber port alarm | OFF |
| (enable ON disable OFF) |
|
4 | N/A | OFF |
Figure 14: Dip Switch Settings and Explanations
Note: DIP switch changes will not become active until the Device Server is power cycled (turned OFF then ON).
19 |
