Ultratec PRO80TM Setting The Number Of Rings, Turning Off The Auto-Answer Relay Voice Announcer

SETTING THE NUMBER OF RINGS

1.Hold down the Program key and press Auto-Answer . AUTO ANSWER RINGS <2> is displayed.

2.Type the number of desired rings or “T” for Toll Saver. You can also press the Spacebar . The number of rings (<2> through <9>) or <TS> is displayed.

3.Press Enter to save this setting. ** AUTO ANSWER RINGS SAVED ** is displayed.

TURNING OFF THE AUTO-ANSWER RELAY VOICE ANNOUNCER

1.Hold down the Program key and press Auto-Answer . AUTO ANSWER RINGS <2> is displayed.

2.Press until AUTO ANSWER VOICE < ON> is displayed.

3.Press the Spacebar to change the option to <OFF>. Then, press

Enter . ** AUTO ANSWER VOICE OFF ** is displayed.

THE REMOTE MESSAGE RETRIEVAL OPTION

Saving a Password

1.Hold down the Program key and press Auto-Answer . AUTO ANSWER RINGS <2> is displayed.

2.Press until CHANGE AA PASSWORD < NO> is displayed.

3.Press the Spacebar to change the option to <YES>. Then, press

Enter . TYPE AA PASSWORD is displayed.

4.Type your password. Your password can be up to 8 characters long and can include letters and numbers only. There is room for only one password.

5.Press Enter to save this setting. ** AA PASSWORD SAVED ** is displayed.

Reading Auto-Answer Messages Remotely

1.Before you leave, press Auto-Answerto turn Auto-Answer on and make sure you have saved a password.

2.Call your Superprint Pro80 from a different TTY.

3.Wait for the Superprint Pro80 to answer the call and send the Auto- Answer message.

4.Type a slash followed by your password like this:

/MYPASS

5.Press Enter . The Superprint Pro80 sends all of the Auto-Answer information. When all of the messages have been sent, <END OF MESSAGES> is briefly displayed followed by CLEAR MESSAGES Y/N.

6.Press Y to clear messages. MESSAGES CLEARED is displayed

What does Toll

Saver do?

Toll Saver saves you the cost of a call when checking your Auto- Answer messages remotely. You can tell if you have any new mes- sages because Auto- Answer picks up the call after two rings. If you do not have new messages, Auto-Answer waits for five rings. So, you can hang up after three rings without being charged for the call.

Can I check messages when I am away from home?

Yes, remote message retrieval allows you to use another TTY when you are away from your Superprint Pro80 to check your Auto- Answer messages.

In order to use this function you must first save a password in your Superprint Pro80. You will be able to read your messages from another TTY location only if a password has been saved.

U S I N G A U T O - A N S W E R • 3 3