INSTALLING PRINTER PAPER
The printer uses
1.Take off the printer cover by lifting the back edge of the cover up toward the keyboard then lifting the cover off. A new unit may not have the cover installed, in which case you will find it elsewhere inside the box.
2.With the paper coming off the bottom of the roll, facing the back of the Superprint Pro80, feed the edge of the paper into the slot on the back until it stops.
3.Turn the Superprint Pro80 on, then press the Enter key several times until the rollers grab the paper and feed it through the printer.
4.Feed the paper through the slot in the printer cover and replace the printer cover.
5.The two open ends of the paper holder fit 
into the holes on each side of the paper roll. Pull the two ends apart in order to fit the paper roll between them. The spring action of the holder will keep the paper on it. You may need to remove the paper holder from the Superprint Pro80 in order to install the roll of paper. To
Before Loading Paper:
First, notice how the paper holder is installed. This holder may come off while loading the paper.
Second, connect the power and phone line before attempting to load the paper (see “Connecting Power & Phone Line” on page 7).
When opening a new roll of paper.
replace the paper holder, snap it back onto the bottom of the TTY.
Paper Holder
New rolls of paper may may have some glue on the first few inches.
Put the paper on the metal holder and snap the holder onto the bottom of the Superprint Pro80.
Feed the paper through the slot in the printer cover. Put the cover back on.
Take off the printer cover: Lift the back edge up toward the keyboard.Then, lift the cover off.
This glue, which helps keep the paper rolled during shipment, can interfere with printing. Make sure paper that has glue on it is fed past the printer and is not used for printing.
Turn on the Superprint Pro80 and press the Enter key sev- eral times until the rollers grab the paper and feed it through the printer.
With the paper coming off the bottom of the roll, facing the back of the Superprint Pro80, feed the edge of the paper into the slot on the back until it stops.
S E T U P • 9
