Selecting Turbo Lock
To make sure that you are using Turbo Code with a call, select Turbo Lock:
1.Press Options . CODE < AUTOMATIC> is displayed.
2.Press the Spacebar to change the option to <TURBO LOCK>. Then, press Enter . TURBO LOCK <OFF> is displayed.
3.Press the Spacebar to change the option to <ON>. Then, press
Enter . ** TURBO LOCK ON ** is displayed.
4.Press
Esc
to exit the Options menu.
BAUDOT CODE
1.Press Options . CODE < AUTOMATIC> is displayed.
2.Press the Spacebar to change the setting to <BAUDOT>.
3.Press Enter . ** BAUDOT CODE ON ** is displayed briefly. Then, the Baudot baud rate option is displayed.
4.Press the to save it.
Spacebar
to select either <45> or <50>. Then, press
Enter
Select <45> to use only 45.5 baud Baudot. Most Baudot TTYs use this setting.
Select <50> to use only 50 baud Baudot. TTYs purchased in Australia, New Zealand or South Africa use 50 baud.
5.Press
Esc
to exit this menu.
ASCII (OPTIONAL)
About ASCII
ASCII stands for American Standard Code for Information Interchange. Some TTYs and all computers in the United States and Canada use ASCII. If your Superprint Pro80 has ASCII, you may need to change some options.
Changing ASCII Options
1.Press Options . CODE < AUTOMATIC> is displayed.
2.Press the Spacebar to change the setting to <ASCII>.
3.Press Enter . ** ASCII CODE ON ** is displayed briefly. Then, the first of the ASCII options is displayed.
4.Press 
to scroll through the options. These described in the next section, “ASCII Options.”
5.For each option, you can press the Spacebar to change the setting. Then, press Enter to save it. The next option will be displayed.
6.Press
Esc
to exit the ASCII Options at any time.
5 0 • U S I N G C O D E S
