To make an unsupervised transfer, while connected to a call (outside line or intercom extension), press Trans. Dial the destination number where you want to transfer the call (extension, UCD Group, Virtual Number, etc.). Note: If your phone has a button that has been pro- grammed to a dial specific extension, you can use that button. Wait for the extension to answer your call, and then announce the transfer. Hang up to complete the transfer.
5.2.2 TRANSFER AND ANSWER CALL
Transfer and Answer is a convenience feature that speeds the process of completing a transfer and answering a ringing call by making the operation possible by pushing one button. (This feature must be used from a feature button that has been programmed by your System Administrator.)
If you are the process of transferring a call and another call rings in, you can press the programmed transfer feature button to complete the transfer and answer the ringing call at the same time.
1.While on an outside line call and another call is ringing, begin the transfer process.
2.Press the programmed transfer feature button.
3.Dial the destination intercom extension number or its DSS but- ton if applicable.
4.Press the programmed transfer feature button. The system completes the transfer and answers the ringing call.
May ‘05 | Comdial | 87 |
