Vidikron SERIES 1080p manual Connections to the Vision, Connector Panel Access, Connecting Source

Installation

3.6

Connections to the Vision 70

Proceed as follows to connect the Vision 70 to your video sources, external controller(s) – if present – and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

Connector Panel Access ➤	To access the connector panel, press
	the door release button so it pops out.
	Turn the knob clockwise or
	counter-clockwise and pull gently on it
	to open the door.
Connecting Source ➤	Connect your video sources to the Vision 70 as shown and described in the sections that
Components to the Vision 70	follow.

HDMI/DVI Connections: See Figure 3-8. With an HDMI source, use the included

HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.

Use the HDMI input whenever possible. This ensures the highest video

Tip	quality because the signal is carried in the digital domain throughout the
	entire signal path, from source component output into the projector.

S-VID /

VID-S

HDMI or DVI Source

(DVD Player or HD Set Top Box)

Figure 3-8. HDMI/DVI Source Connections

24 Vidikron Vision 70 Series Owner’s Operating Manual