Manuals / Vidikron / Computer Equipment / Projector

Vidikron SERIES 1080p manual 3Installation, Remote Control

Models: SERIES 1080p

1 88

Download 88 pages 55.45 Kb

Page 25

3Installation

3Installation

To install batteries in the remote control, push the battery cover and slide it off. Install the two AAA batteries with the correct polarity and then replace the cover.

3.1

Remote Control

• Make sure that the battery polarities are correct when installing the batteries.

Notes on Batteries

•Do not mix an old battery with a new one or different types of batteries.

•If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.

• Make sure that there is nothing obstructing the infrared beam between the remote	Notes on Remote Control
control and the IR receiver on the projector.	Operation

•If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones.

•The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting.

•Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the projector, and repeat the operation.

•The Ø icon appears on the screen when you press a button for an unavailable function.

Vidikron Vision 70 Series Owner’s Operating Manual

13

Image 25

Vidikron SERIES 1080p manual 3Installation, Remote Control

Contents

O W N E R ’ S O P E R A T I N G M A N U A L SERIES 1080p DLP PROJECTORSVision Vision 70/CineWide Vision 70/CineWide with AutoScope Page WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY TWO YEAR LIMITED WARRANTYWHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY For Projectors, Video Processors and ControllersIMPORTANT -- WARRANTY REGISTRATION EFFECTIVE WARRANTY DATECONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE COPYRIGHT AND TRADEMARKSVIDIKRON Attn Customer Service Department 2900 Faber Street ADDITIONAL INFORMATIONVIDIKRON PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS Union City, CA Ph 510 Fax 510 Toll Free 888 4VIDIKRONSafety Precautions Description, Features and Benefits 1Table of ContentsVision 70 Connector Panel Installation ConsiderationsMaintenance and Troubleshooting Table of ContentsOperation viiiSpecifications Table of ContentsVidikron Vision 70 Series Owner’s Operating Manual Serial CommunicationsVidikron Vision 70 Series Owner’s Operating Manual Table of ContentsVidikron Vision 70 Series Owner’s Operating Manual 1List of FiguresVidikron Vision 70 Series Owner’s Operating Manual List of Figures1Introduction A carriage return must be used after each command or stringAbout This Manual DANGER appears when a given action can cause severe injury or death 1.2 Using This ManualDANGER NOTES emphasize text with unusual importance or special significanceNote screen 1.3 Description, Features and BenefitsOptional Accessories Vision 70 at a Glance 2. Controls and FunctionsFigure 2-1. Vision 70 Front/Side/Top View 1. VIDIKRON LOGO 2. TOP IR SENSOR 3. LAMP LED6. INTAKE VENT 7. EXHAUST VENT 8. FRONT IR SENSOR 9. PROJECTION LENS 5. TEMP LEDFigure 2-2. Vision 70 Rear/Bottom/Side View Controls and Functions5. FRONT/REAR ADJUSTERS 2.2 Vision 70 Connector PanelFigure 2-3. Vision 70 Connector Panel 2. DOOR RELEASE BUTTON 3. CABLE OPENINGFor best results, do not run your DVD player in progressive mode 3. COMP 1 RCA connectors2.3 Built-In Keypad 1. HDMI DigitalFigure 2-4. Vision 70 Remote Control 2.4 Vision 70 Remote ControlControls and Functions Vidikron Vision 70 Series Owner’s Operating Manual2. Source Selection Buttons COMP 1 SD Component 1. ON / OFFS-VID S-Video VIDEOISF NT 4. Memory Preset Buttons MEM1ISF DAY 5. Cursor KeysFigure 2-5. Remote Control/Built-In Keypad Functional Cross-Reference Remote Control/Built-In Keypad Functional Comparison9. Motorized Lens Controls LENS SHIFT FOCUS3.1 Remote Control 3InstallationTable 3-1. Installation Overview 3.2 Quick SetupNote specialist InstallationTable 3-2. Projector Installation Options 3.3 Installation ConsiderationsFigure 3-1. Estimating Throw Distance Table 3-3. Throw Ratios for the Vision 70 SeriesFloor Installation Ceiling InstallationFigure 3-2. Projector Placement Figure 3-3. Vertical Lens Shift EXAMPLE ONLYScreen Mirror Figure 3-4. Folded Opticsinstall the projector and adjust the primary lens Installing the Optional CineWide Lens MountAttaching the AutoScope Lens Motor or Fixed CineWide Base Plate to ProjectorVidikron Vision 70 Series Owner’s Operating Manual InstallationCeiling Mount Extension Brackets Figure 3-6. Vision 70 With Ceiling Mount Extension Bracketsplate ceiling mounting platePlate - Bottom View 3.5 Mounting the Vision particularly important when ceiling-mounting a Vision 70/CineWideUse only the Vidikron-approved ceiling mount kit designed for your with itUse the HDMI input whenever possible. This ensures the highest video 3.6 Connections to the VisionFigure 3-8. HDMI/DVI Source Connections Figure 3-9. RGB Connections The Vision 70 supports computer resolutions of 1024x768, 800x600 andInstallation Figure 3-10. Progressive Component Video ConnectionsY Pb Pr Vidikron Vision 70 Series Owner’s Operating ManualFigure 3-11. Composite, S-Video and Component Video Connections DTV Source DVD Player, VCR Satellite Receiver etcInstallation Vidikron Vision 70 Series Owner’s Operating ManualInstallation Figure 3-12. RS-232 Control System ConnectionDTV Source DVD Player, VCR Satellite Receiver etc RS-232 ControllerConnecting 12-Volt Trigger Output to External Theater Equipment Figure 3-14. Connecting the 12-Volt Trigger Output to Other EquipmentThe input voltage to the AutoScope lens motor must be between 100 and 3.7 Turning on the Power3.10 Primary Lens Adjustments 3.8 Changing the OSD Language 3.9 Adjusting the Picture OrientationFocus Zoom Vertical Lens Shift Figure 3-15. Standard Vision 70 Anamorphic Lens Mounting Assembly 3.11 Installing and Adjusting the CineWide Anamorphic LensAdjusting the Lens Height Y Correct Lens Angle Incorrect Lens Angle and Adjustment Figure 3-16. Anamorphic Lens Mounting Assembly - Exploded ViewVision 70/CineWide with AutoScopeFigure 3-17. Attaching the Anamorphic Lens to the Lens Adapter Ring Attach Lens Mounting Assembly to Lens Motor Carriage PlateToo Far Left Correct position Too Far Right Adjusting the Horizontal X Lens PositionHeight/Y Adjustment T-Screws on either side of the lens. Then, slowly move the anamorphic lens into place so that there are no shadows on the top or bottom of the screen Installation Anamorphic Lens Top ViewVidikron Vision 70 Series Owner’s Operating Manual Adjusting the Geometry 4Operation Using Picture-In-Picture/ Picture-By-Picture PIP/PBP4.1 Selecting Video Memory 4.2 Selecting an Aspect Ratio 4.3 Selecting An Input Source 4.44.5 Using the On-Screen Menus Installation AdjustService PictureMain Menu Picture AdjustFigure 4-2. Typical PLUGE Pattern for Adjusting Brightness Perform the adjustments in the order listed heregray Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrastyellow cyanyellow graycyan greenThe Sharpness setting has no effect if the Video Filter described on Figure 4-5. Typical Test Pattern for Adjusting SharpnessWhen you change the aspect ratio, save the change to a preset You must enter a passcode in order to enter the Service menuImage Option OperationOperation Table 4-1. Aspect Ratio SettingsDescription lens then restores the proper Table 4-1. Aspect Ratio Settings continuedCinema CINEMAProjector Status To adjust the image position with a 480i source, use the Image ShiftEXIT to return to the previous menu or MENU to exit Vidikron recommends that the keystone feature not be used unlessInstallation White Balance Gamma Selection ICC Adjust Image Over Scan ServiceHorizontal Masking Fan Control Lamp Reset Timer RS-232 Baud Rate Remote Control Screen Trigger Mode Return to User OSDFor each component color, you can adjust the following Page You can change the secondary IR code if either This menu should be used by ISF-certified technicians only When you change a setting, save the change to a preset afterwardsISF Calibration Splash Screen Timer Use the or button to set the Splash Screen Timer. This timer controls how long the startup ISF and Vidikron logo image stays on-screen after you turn on the projector. Select from 5 to 60 seconds, in one-second increments. When finished, press EXIT Vidikron Vision 70 Series Owner’s Operating Manual Operation5.1 Lamp Replacement 5Maintenance and Troubleshootinglamp assembly for replacement Table 5-1. Troubleshooting Chart 5.2 Troubleshooting TipsMaintenance and Troubleshooting Maintenance and Troubleshooting Table 5-1. Troubleshooting Chart continuedVidikron Vision 70 Series Owner’s Operating Manual source are connected to theVidikron Vision 70 Series Owner’s Operating Manual Maintenance and TroubleshootingRS-232 Connection and Port Configuration 6.2 Serial Command SyntaxTable 6-1. Serial Commands 6Serial CommunicationsSerial Communications Table 6-1. Serial Commands continuedSerial Communications Table 6-1. Serial Commands continuedx081x Vidikron Vision 70 Series Owner’s Operating ManualSerial Communications Table 6-1. Serial Commands continuedx282x Table 7-1. Vision 70 Specifications 7SpecificationsVision 70 Specifications Vidikron Vision 70 Series Owner’s Operating ManualSpecifications Table 7-1. Vision 70 Specifications continuedSpecifications Table 7-1. Vision 70 Specifications continuedLimited Warranty Specifications are subject to change without noticeFigure 7-1. Vision 70 Dimensions 7.2 Vision 70 DimensionsSpecifications Vidikron Vision 70 Series Owner’s Operating ManualNote procedure Appendix A. Personalizing the ISF Splash Screen on the VisionOnly ISF-trained and -certified technicians should attempt this Personalizing the ISF Splash Screen on the Vision 9. Power-cycle the projector to see the changeCALIBRATED FOR John Doe By Tinh Ho CUSTOM BUILT BY Vidikron Vision 70 Series Owner’s Operating ManualPage 2900 Faber Street Union City, CA 94587 VidikronSERIAL NUMBER