Installation

If your Vision 70 is equipped with a CineWide with AutoScope system, use the cable supplied with the AutoScope Lens Motor to connect the motor to the 12-volt trigger output as shown in Figure 3-13.

Connecting 12-Volt Trigger Output to External Theater Equipment

S-VID /

VID-S

3.5-mm mini plug

to AutoScope Lens Motor

Figure 3-13. Connecting the 12-Volt Trigger Output to the AutoScope Lens Motor

If your home theater contains a retractable screen, screen mask or other 12-volt trigger-activated equipment, use the cable supplied with the Vision 70 to connect it to the 12-volt trigger output as shown in Figure 3-14.

S-VID /

VID-S

3.5-mm mini plug

to other,

 

 

12-volt

 

Black = Ground (Sleeve)

trigger-activated equipment

 

 

 

 

Red = +12V (Tip)

 

(screen, screen mask etc.)

 

 

 

Figure 3-14. Connecting the 12-Volt Trigger Output to Other Equipment

Vidikron Vision 70 Series Owner’s Operating Manual

29

Page 41
Image 41
Vidikron SERIES 1080p manual Connecting the 12-Volt Trigger Output to Other Equipment