GENERAL INSTRUCTIONS
1.Place liquids and soft foods in the container first, solid items and ice last. Although not necessary for processing, you may want to cut or break food into smaller pieces for more precise measuring of ingredients. Thawed or partially thawed fruit is recommended. HIGH speed (or highest button on models with electronic controls) is recommended for
2.Set the container on the motor base by aligning it over the centering pad anchored to the base. (Motor must be completely stopped before positioning container.) Containers are not to be used for hard, dry materials. Avoid running your machine with the container empty.
3.Always operate the machine with the complete
When processing hot liquids, DO NOT use a
4.Select the desired timer settings, or
4a. If mixture stops circulating, you have likely trapped an air bubble. Either insert the accelerator tool/tamper (sold separately for some models) through the lid while blending, or stop the motor, remove the container from the base and stir or scrape the mixture from the sides of container into the center using a rubber spatula to press any air bubbles away from the blades. Replace the lid and continue blending.
4b. Due to the blending speed of the machine, processing times are greatly reduced over other manufacturers’ machines. Until you become accustomed to the speed, watch your mixture carefully to avoid
5.After the blender has been stopped, wait until the blade comes to a complete stop before removing the lid and/or container from the motor base.
6.Remove the container, pour, garnish and serve the drink.
7.Turn power OFF and/or unplug the machine at night or whenever machine will be left unattended.
Maintenance Tips:
•Never bang the container against a surface to loosen the ingredients. Remove the container from the base and use a rubber spatula to remove thick mixtures from the bottom of your container.
•Never shake or rattle a container while in use.
•Never remove the container before the machine has come to a complete stop.
•Never start the motor before the container is in place.
Additional Instructions for the Portion Blending System (PBS) Ice Bin
1.DO NOT fill the ice bin higher than ice bin rim.
2.Make sure ice bin lid is properly in place before operating the machine.
3.DO NOT place objects on the container or touch the container while the machine is running. This will affect ice portion control.
4.Using ice from an
WARNING:
If you detect a change in the sound of the machine or if a hard or foreign object comes into contact with the blades, DO NOT serve the drink/food. Inspect your blade assembly for loose, nicked or missing parts. If parts are loose, missing or nicked, replace with new blade assembly. (See the machine’s detailed Use and Care Manual online for details.)
IMPORTANT NOTES!
For models with electronic controls: On all units, the
For models with
For the BarBoss and Drink Machine Timer blenders: Set the timer for 20 seconds. Turn the machine ON and let the machine run for 20 seconds. Repeat this step 3 times for a total of 1 minute. Be careful never to touch any moving parts while in use.
For the
Consult
4