Vivotek M, SD8364E user manual Applications DI and do

VIVOTEK

Applications > DI and DO

Digital input: Select High or Low to define normal status for the digital input. Connect a digital input from a sensor device to the camera, the Network Camera will report the current signal status. You may then configure the Normal status (non-trigger status) as High or Low.

Digital output: Select High or Low to define normal status for the digital output. Connect an output line to an external device, the Network Camera will report the current signal status. You may then configure the Normal status (non-trigger status) as High or Low.

Set up the event source as DI on Event > Event settings > Trigger. Please refer to page 105 for detailed information.

User's Manual - 121