VIVOTEK
1-3. Connect with the Mount Bracket
Combine the components of the top section.
1.Press the seal ring into the groove on the interface section. Use the black machine screws (M4x8) to attach the interface section to the dome cap. Note that you should orient and align the spring contacts with the dehumidifier unit on the dome cap.
2.Secure the dome cap to the mount bracket.
3.Use the included hex wrench to secure the connection.
3
Seal Ring
When done, the top section will look like this. You can now carry the cam- era and the top section
to the installation site.
2
Dehumidifier Unit 
1
Mount
Bracket
Interface Section 
Connector
User's Manual - 17
