Vivotek M, SD8364E user manual Privacy mask

VIVOTEK

Privacy mask

Click Privacy Mask to open the settings page. On this page, you can block out sensitive view areas to address privacy concerns.

■ To set the privacy mask windows, follow the steps below:

1. Click on the Enable privacy mask checkbox to enable this function.

NOTE:

1.The navigation buttons here also support the continuous move. You can click and hold down the button to move across the screen until you release the button.

2.You can not create privacy masks at angles between +70° and -70°.

0° 0°

-70°	+70°
	90°

2.Use mouse clicks on the screen to move to a place where you want to create a mask. You can also use the PTZ panel to fine-tune the move to the target area.

3.Enter a name for the masking window. Click Add to create a new window.

4.Click on the Modify button and then use the mouse cursor to re-size the masking window, which is recommended to be at least twice the size of the object (height and width) you want to cover. You can select the Drawing mode as "Fixed in center" or "Drag to move."

•When using the Fixed in center mode, you can move to the area of your interest, and then manually change the size and shape of the masking window.

•When using the Drag to move mode, you can move to an area of your interest using the PTZ buttons above, and then click and drag to draw a masking window. The click to move maneuver is not available when you select the Drag to move mode.

5.You can also change the color of the mask from the Color menu.

6.If preferred, move the field of view to other places to create more privacy masks.

You may be prompted by the message when trying to create a privacy mask at angles between +70° and -70°.

User's Manual - 61