
VIVOTEK
2.Feed the Ethernet cable and IO wires through the mounting bracket, the openings on the dome cap, and to the interface section. Attach the rubber seal plug to dome cap for water proofing.
3.Secure the included ground wire to the dome cap, pass it through the mount bracket, and con- nect the other end to a grounded conduit later.
4.Remove seal from the breathe hole on the top section if your camera comes with the dehu- midifier.
2
Mount bracket
4
Dome cap | 3 |
Interface Section
NOTE:
1.IO wires are
2.Avoid touching the circuit boards to prevent damage by electro static discharge.
16 - User's Manual