
VIVOTEK
Installation - for the Configuration w/ Ex- tended Cables
Hardware Installation
IMPORTANT:
The SD8364E series comes with or without the extended Ethernet and IO combo cables. Different configurations come with different ordering numbers. Therefore, the installation procedure can differ, and the procedures are separately described as follows.
IMPORTANT:
If your camera comes without the dehumidifier, you should examine whether the color of the silica gel inside the chassis has turned dark. If so, you should replace the desiccant bag.
To replace the desiccant bags:
1. Remove the dome cover by loosening 4 T25
2. Replace the desiccant bags by attaching them firmly to the inside of the chassis.
3.
Also note the following:
1. Do not install the camera in a raining day.
2. It takes approximately 2 days to suppress the moisture level to 30% or lower, either using the desiccant bags or the dehumidifier.
3. Condensation may still be observed from on the dome cover within 30 minutes.
User's Manual - 9