VIVOTEK
Exposure Profile: (Only available when the IR cut filter is not set to the Auto mode)
If you want to configure another sensor and exposure setting for an individual day/night/schedule mode, please click Profile to open the Profile of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to take effect.
Please follow the steps below to set up a profile:
1.Check Enable and apply this profile to.
2.Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of time if you choose Schedule mode.
When a span of time is configured using the Schedule mode, you can configure the Day/Night setting for controlling the behavior of the IR cut filter during that time.
3.Configure Exposure control settings in the folowing columns. Please refer to previous dicussions for detailed information.
4.Click Save to enable the setting and click Close to exit the window.
60 - User's Manual
