Vivotek M, SD8364E user manual Imagequalit Rate first Imagequality Indicates

								VIVOTEK
		s2: cbr
		s3: cbr
s<0~(m-1)>_h264_quant	1~5,	3	4/4	Quality	of		video	when
	99, 100			choosing			vbr	in
				“ratecontrolmode”.
				99 is the customized manual
				input setting.
				1 = worst quality, 5 = best
				quality.
				100 is percentage mode.
s<0~(m-1)>_h264_qvalue	0~51	31	4/4	Manual	video		quality	level
				input.
				(s<0~(m-1)>_h264_quant =
				99)
s<0~(m-1)>_h264_qpercen	1~100	50	4/4	Manual	video		quality	level
t				input.
				(s<0~(m-1)>_h264_quant =
				100)
s<0~(m-1)>_h264_bitrate	1000~40000000	s0:	4/4	Set bit rate in bps when
		6000000		choosing			cbr	in
		s1:		“ratecontrolmode”.
		6000000
		s2: 512000
		s3:
		6000000
s<0~(m-1)>_h264_maxfra	1~30	s0: 30	1/4	Set maximum frame rate in
me		s1: 30		fps (for h264).
		s2: 15
		s3: 30
s<0~(m-1)>_h264_profile	0~2	1	1/4	Indicate H264 profiles
				0: baseline
				1: main profile
				2: high profile
s<0~(m-1)>_mjpeg_priority	framerate,	s0:	4/4	The policy to apply when the
policy	imagequality	framerate		target bit rate is not sufficient
		s1:		to satisfy		current encoded
		framerate		conditions.
		s2:		“framerate”		indicates		frame
		imagequalit		rate first.
		y		“imagequality”			indicates

User's Manual - 159