Network Settings, Click Change Settings | Vixel 335 specs

Vixel Model 335 Installation & Configuration Guide		CHAPTER 3 Management


	Setting	Description

	Agent Up Time	The duration of time the switch has been operational.

	Name	The name of the switch.

	Location	The location where the switch resides.

	Contact Name	The person’s name to contact for switch issues.

	HW Version	The hardware version of the switch. Cannot be configured or
		modified.

To modify the current settings, click Change Settings. The System Information page appears with the fields available for modification.

Figure 3-3.System Information (Change Settings) Page

Network Settings

You can change the switch’s network settings (IP Address, Gateway, and Netmask) through the Web Manager once the switch has established communications with the network.

Note: To change the network settings of a switch that is not yet communicating with your network, connect through a null modem serial cable and change the IP Address through the CLI. For further information, See “Using the Command Line Interface (CLI)” on page 36.

To view the current network settings, click System.

To change the switch’s network settings:

1.Click Change Settings.

2.Type the new setting (IP Address, Gateway, or Netmask) in the appropriate text box.

3.When finished, click Submit.

15

Image 18

Vixel 335 manual Network Settings, Click Change Settings

Contents

InSpeed Model Part Number 00041363-001 Rev. a Table of Contents About This Guide FeaturesIntroduction Overview Fibre Channel Arbitrated Loop InSpeed Technology Installation Unpacking the SwitchInstalling the Switch Small Form-Factor Pluggable SFP Installation Using Small Form Factor Pluggable SFP TransceiversPerforming a Power On Systems Test Small Form-Factor Pluggable SFP Removal Setting Up the Switch Attaching Devices Understanding the Switch’s LEDs Power OnSystem LEDs System LEDs Indication Port LEDs SFP Cascading Switches Cascading with Non-Overlapping Zones Acceptable Single Cascade in Zones 2-12 Only Using the Web Manager Connecting to the Web ManagerE rv i e w Navigation Logging On and Off Configuring the Switch Configuration Task Location in Web ManagerResetting the Switch System Information Settings Setting Description Network Settings Click Change Settings Switch Identification Switch SpeedSwitching Mode Blocking ARB Downloading the Switch Configuration Time Settings Firmware Settings Firmware Information Click Change Firmware Settings Event Log Messages FC Switch Information FC Switch Information OS Information Detection Indication CLS Port Usage Information 11.Ordered Set Information Page with Highlighted Zones Value Description 13.Received Port Utilization Page with Highlighted Zones Port Settings 15.Port Information 16.Port Information Page with Highlighted Zones Mode Description 18.Cascade Information 19.Cascade Information Page with Highlighted Zones Policy Settings Switch Policy Description 21.Policies Change Settings Zone Settings 22.Overlapping Zones Overlapping Zones 25.Overlapping Zone 1 Information 26.Overlapping Zone 1 Information Configuration Non-Overlapping Zones Click Back to Non-overlapping Zone Info to view the changes Management Using the Command Line Interface CLI Connecting to the CLI Configuration Task CLI Command Noz Changing the Switch’s IP Parameters Configuring Switch InformationEnabling or Disabling Dhcp Requests Managing the Firmware Downloading New Firmware Message Action Configuring the Trap Destination Table Edit Trap Destination Menu Active Value NEW Value Option Description Changing the CLI/Web Password Viewing Management, Policy, and Threshold Settings Policies Policy Description Settings Description Threshold Information Actions Action Description Changing the Switching Mode Command Description Number. You can also change the port policies Displaying Ports PLL Enables you to configure control of the port. Select from Resetting the Switch to Factory Default Settings Resetting the SwitchResetting the Hardware Viewing the Event Log Changing the Switch’s Operating Speed Overlapping Zoning ConfigurationViewing and Understanding Zoning Information Non-Overlapping Zoning Configuration Example noz 25,6,7,8 39,10 Reference Technical Support Tro ub l e sh oo ti n g Small Form-Factor Pluggable SFP Issues Fibre Channel References Appendixes Appendix a Specifications Specification s Operating Conditions Vixel Model 335 Operating Conditions General Commands CommandsConsole Commands Browse Commands Action Commands Show Zone URL Appendix C Event Messages Event Meaning Action Severity Message Appendix C Event Messages Vixel Model 335 Installation & Configuration Guide Vixel Model 335 Installation & Configuration Guide Cross References Appendix E Glossary Scsi Configuring switch information Index Index