Vixel Model 335 Installation & Configuration Guide | CHAPTER 3 Management |
|
|
Note: Ports 11 and 12 can only be in Zone 1.
Non-Overlapping Zoning Configuration
The
You can have simultaneous overlapping and
The
To view zone configuration by zone, type noz.
The current
Non Overlapping Zone Configuration | By | Port |
|
|
| ||||||||
Port Number: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
Zone Number: | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 1 | 1 | |
Port | State: | B | B | B | B | B | I | U | B | B | B | B | B |
Zone | State: | D | D | D | D | D | U | U | U | U | U | D | D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: Each port may only be in one
Zone number: Possible values are
Port State: Possible values are "B" (Bypassed), "I" (Inserted), "D" (Diagnostic Transmit), "E" (External Loopback), "U" (Unknown), and "?" (Access Error).
Zone State: Possible values are "U" (Up) and "D" (Down).
To place ports into
1.Type noz to view the current
2.At the prompt, type noz z:p,p,p.. z:p p.. z.. (where z=zone number
Ports on a zone may be separated by a comma or spaces.
Note: Unspecified ports are automatically placed into Zone 1.
Example: noz 2:5,6,7,8 3:9,10
Ports
53
