Vixel 335 manual Appendix C Event Messages

Vixel Model 335 Installation & Configuration Guide				APPENDIX C Event Messages
	Ref	Event	Meaning		Action	Severity
		Message
	132	Zone up then down	The zone state has cycled		---	Warning
			through the “up” and “down”
			states several times. Current
			zone state (at the time of this
			message) is down.
	133	Zone down then up	The zone state has cycled		---	Warning
			through the “up” and “down”
			states several times. Current
			zone state (at the time of this
			message) is up.
	140	Port inserted	A port was inserted onto the		---	Info
			zone (after being bypassed).
	141	Port bypassed	A port was bypassed (could not		Check all connections	Info
		(LIPF8)	insert) because a LIP(F8) was		for the specified port.
			received at port input. (A
			LIP(F8) indicates a loop fail-
			ure.)
	142	Port bypassed (tx	A port was bypassed because		Contact an authorized	Info
		fault)	the switch detected a transmit-		service representative.
			ter fault on the port’s trans-		The transceiver may
			ceiver.		need replacing.
	143	Port bypassed	A port was bypassed (could not		---	Info
		(timeout)	insert) because no LIP(F7)s
			were received after continuous
			transmission of LIP(F7)s for
			112 milliseconds.
	145	Port bypassed	A port was bypassed for a rea-		---	Info
			son other than transceiver
			transmitter fault, invalid
			response, or manual bypass.
	146	Port bypassed then	A port was bypassed, then		---	Info
		inserted	inserted.
	147	Port inserted then	A port was inserted, then		---	Info
		bypassed	bypassed.
	150	Transceiver inserted	A transceiver was inserted.		---	Notice
	151	Transceiver removed	A transceiver was removed.		---	Notice
	160	Management active	Agent is operational.		---	Info
	165	Agent task asserted	During normal operations, an		Contact an authorized	Critical
		on prev exec cycle	attempt to execute a command		service
			was aborted due to an internal		representative.
			error in the firmware.
			The switch automatically resets
			after the occurrence.
	166	Agent machine	A task attempted to execute an		Contact an authorized	Critical
		exception on prev	unknown command. The		service
		exec cycle	switch automatically resets		representative.
			after the occurrence.
	170	Diagnostic function	A diagnostic setting is miscon-		Check diagnostic set-	Warning
		aborted	figured and required a firm-		tings for incompatibili-
			ware override.		ties.
	200	CRC error detected	CRC errors were detected in a		No action required. You	Info
			frame received on a port.		can modify the CRC
					Error threshold through
					the Web Manager or
					CLI interface.
	201	CRC error threshold	During the past ten seconds, the		No action required. You	Info
		exceeded	number of CRC errors in		can modify the Error
			frames received by the specified		Count threshold through
			port exceeded the current		the Web Manager or
			threshold value.		CLI interface.
	202	OS Error threshold	During the past ten seconds, the		No action required. You	Info
		exceeded	number of OS errors (invalid		can modify the Error
			transmit words, or 8b/10b		Count threshold through
			encoding errors) in frames		the Web Manager or
			received by the specified port		CLI interface.
			exceeded the current threshold
			value.

64