Value Description | Vixel 335 specification

Vixel Model 335 Installation & Configuration Guide			CHAPTER 3 Management

	The Utilization Percentages values are:

	Value		Description

	Average %	The average percentage data for the port in the zone over a period of Average
		Window Size seconds.

	Peak %	The Peak data communication rate usage for the port

	Low %	The Low data communication rate usage for the port.

The sample period, average windows size, and peak/low window size values are also displayed.

To highlight a specific zone to view traffic patterns, click the Highlight Zone drop-down box and select the desired zone. The highlighted zone displays in color.

Figure 3-13.Received Port Utilization Page with Highlighted Zones

To change the Port Usage settings:

1.Click Change Settings. The Received Port Utilization page appears with fields available for modification.

Figure 3-14.Received Port Utilization (Change Settings) Page

2.You may change the Average Sample Period and Peak/Low Sample Period values (in seconds) by entering new values in the appropriate text boxes. The Sample Period value cannot be modified.

24

Image 27

Vixel 335 manual Value Description, Received Port Utilization Page with Highlighted Zones

Contents

InSpeed Model Part Number 00041363-001 Rev. a Table of Contents Overview FeaturesIntroduction About This Guide InSpeed Technology Fibre Channel Arbitrated Loop Installation Unpacking the SwitchInstalling the Switch Small Form-Factor Pluggable SFP Removal Using Small Form Factor Pluggable SFP TransceiversPerforming a Power On Systems Test Small Form-Factor Pluggable SFP Installation Attaching Devices Setting Up the Switch Understanding the Switch’s LEDs Power OnSystem LEDs Port LEDs System LEDs Indication SFP Cascading with Non-Overlapping Zones Cascading Switches Acceptable Single Cascade in Zones 2-12 Only Using the Web Manager Connecting to the Web ManagerE rv i e w Logging On and Off Navigation Configuring the Switch Configuration Task Location in Web ManagerResetting the Switch Setting Description System Information Settings Click Change Settings Network Settings Blocking ARB Switch SpeedSwitching Mode Switch Identification Time Settings Downloading the Switch Configuration Firmware Information Firmware Settings Event Log Messages Click Change Firmware Settings FC Switch Information FC Switch Information Detection Indication OS Information CLS 11.Ordered Set Information Page with Highlighted Zones Port Usage Information 13.Received Port Utilization Page with Highlighted Zones Value Description 15.Port Information Port Settings 16.Port Information Page with Highlighted Zones 18.Cascade Information Mode Description 19.Cascade Information Page with Highlighted Zones Switch Policy Description Policy Settings 21.Policies Change Settings 22.Overlapping Zones Zone Settings 25.Overlapping Zone 1 Information Overlapping Zones Non-Overlapping Zones 26.Overlapping Zone 1 Information Configuration Click Back to Non-overlapping Zone Info to view the changes Management Connecting to the CLI Using the Command Line Interface CLI Noz Configuration Task CLI Command Changing the Switch’s IP Parameters Configuring Switch InformationEnabling or Disabling Dhcp Requests Downloading New Firmware Managing the Firmware Message Action Edit Trap Destination Menu Active Value NEW Value Configuring the Trap Destination Table Option Description Viewing Management, Policy, and Threshold Settings Changing the CLI/Web Password Policy Description Policies Threshold Information Settings Description Action Description Actions Command Description Changing the Switching Mode Number. You can also change the port policies PLL Displaying Ports Enables you to configure control of the port. Select from Viewing the Event Log Resetting the SwitchResetting the Hardware Resetting the Switch to Factory Default Settings Changing the Switch’s Operating Speed Overlapping Zoning ConfigurationViewing and Understanding Zoning Information Example noz 25,6,7,8 39,10 Non-Overlapping Zoning Configuration Technical Support Reference Tro ub l e sh oo ti n g Fibre Channel References Small Form-Factor Pluggable SFP Issues Appendixes Specification s Appendix a Specifications Vixel Model 335 Operating Conditions Operating Conditions Browse Commands CommandsConsole Commands General Commands Show Zone Action Commands URL Event Meaning Action Severity Message Appendix C Event Messages Appendix C Event Messages Vixel Model 335 Installation & Configuration Guide Vixel Model 335 Installation & Configuration Guide Cross References Appendix E Glossary Scsi Index Configuring switch information Index