FC Switch Information | Vixel 335 specs

Vixel Model 335 Installation & Configuration Guide	CHAPTER 3 Management

FC Switch Information

The FC Switch Information page displays the switch view by ports. Each port displays the zone, utilization percentage, and associated ALPA(s). You can identify all ports in a specific zone by highlighting that zone.

To view the switch settings, click FC Switch. The FC Switch Information page appears.

Figure 3-8.FC Switch Information Page

The displayed settings are listed below:

Setting	Description

Port number	The port number on the switch.

Zone number	The zone number to which the port is assigned.

Utilization percentage	Measures the amount of traffic that is flowing through the
	port.

ALPA(s)	The Arbitrated Loop Physical Address for each device
	connected to the port.

To highlight a specific zone, click the Highlight Zone drop-down box and select the desired zone. The highlighted zone displays in color.

Figure 3-9.FC Switch Information Page with Highlighted Zones

You can also view Ordered Set and Port Usage information.

20

Image 23

Vixel 335 manual FC Switch Information

Contents

InSpeed Model Part Number 00041363-001 Rev. a Table of Contents Overview FeaturesIntroduction About This Guide InSpeed Technology Fibre Channel Arbitrated Loop Installing the Switch InstallationUnpacking the Switch Small Form-Factor Pluggable SFP Removal Using Small Form Factor Pluggable SFP TransceiversPerforming a Power On Systems Test Small Form-Factor Pluggable SFP Installation Attaching Devices Setting Up the Switch System LEDs Understanding the Switch’s LEDsPower On Port LEDs System LEDs Indication SFP Cascading with Non-Overlapping Zones Cascading Switches Acceptable Single Cascade in Zones 2-12 Only E rv i e w Using the Web ManagerConnecting to the Web Manager Logging On and Off Navigation Resetting the Switch Configuring the SwitchConfiguration Task Location in Web Manager Setting Description System Information Settings Click Change Settings Network Settings Blocking ARB Switch SpeedSwitching Mode Switch Identification Time Settings Downloading the Switch Configuration Firmware Information Firmware Settings Event Log Messages Click Change Firmware Settings FC Switch Information FC Switch Information Detection Indication OS Information CLS 11.Ordered Set Information Page with Highlighted Zones Port Usage Information 13.Received Port Utilization Page with Highlighted Zones Value Description 15.Port Information Port Settings 16.Port Information Page with Highlighted Zones 18.Cascade Information Mode Description 19.Cascade Information Page with Highlighted Zones Switch Policy Description Policy Settings 21.Policies Change Settings 22.Overlapping Zones Zone Settings 25.Overlapping Zone 1 Information Overlapping Zones Non-Overlapping Zones 26.Overlapping Zone 1 Information Configuration Click Back to Non-overlapping Zone Info to view the changes Management Connecting to the CLI Using the Command Line Interface CLI Noz Configuration Task CLI Command Enabling or Disabling Dhcp Requests Changing the Switch’s IP ParametersConfiguring Switch Information Downloading New Firmware Managing the Firmware Message Action Edit Trap Destination Menu Active Value NEW Value Configuring the Trap Destination Table Option Description Viewing Management, Policy, and Threshold Settings Changing the CLI/Web Password Policy Description Policies Threshold Information Settings Description Action Description Actions Command Description Changing the Switching Mode Number. You can also change the port policies PLL Displaying Ports Enables you to configure control of the port. Select from Viewing the Event Log Resetting the SwitchResetting the Hardware Resetting the Switch to Factory Default Settings Viewing and Understanding Zoning Information Changing the Switch’s Operating SpeedOverlapping Zoning Configuration Example noz 25,6,7,8 39,10 Non-Overlapping Zoning Configuration Technical Support Reference Tro ub l e sh oo ti n g Fibre Channel References Small Form-Factor Pluggable SFP Issues Appendixes Specification s Appendix a Specifications Vixel Model 335 Operating Conditions Operating Conditions Browse Commands CommandsConsole Commands General Commands Show Zone Action Commands URL Event Meaning Action Severity Message Appendix C Event Messages Appendix C Event Messages Vixel Model 335 Installation & Configuration Guide Vixel Model 335 Installation & Configuration Guide Cross References Appendix E Glossary Scsi Index Configuring switch information Index