Firmware Settings, Firmware Information | Vixel 335 instruction

Vixel Model 335 Installation & Configuration Guide	CHAPTER 3 Management

Note: Clicking Back on the browser tool bar may not update settings due to web browser caching pages in memory.

To change the Time Mode:

1. From the Time Mode drop-down box, select the desired time setting.

Setting	Description

none	The switch does not set the time.

Server	The switch receives the time from a time server via
	Ethernet.

User	The user manually sets the time for the switch.

2.Click Submit. To use a time server:

1.Select Server in the Time Mode drop-down box.

2.Enter the IP Address for the time server in the Time Server text box.

3.Enter the desired update interval in minutes in the Time Server Update Interval (min) text box.

4.Click Sync to Server Time to immediately synchronize the server time to the time server at the designated IP Address.

5.Click Submit.

To set the time setting to the computer connected to the switch, click the Sync to PC Time Now Sync button and then click Submit.

To view the new time settings, click Back to Time page.

Firmware Settings

The Firmware page displays information on the current firmware version, the alternate firmware version, and the version of the software that loads the firmware image on boot up.

To view the current firmware settings:

1.Click System. The System Information page appears.

2.Click Firmware. The Firmware Information page appears.

Figure 3-6.Firmware Information Page

18

Image 21

Vixel 335 manual Firmware Settings, Firmware Information

Contents

InSpeed Model Part Number 00041363-001 Rev. a Table of Contents Introduction FeaturesAbout This Guide Overview InSpeed Technology Fibre Channel Arbitrated Loop Installation Unpacking the SwitchInstalling the Switch Performing a Power On Systems Test Using Small Form Factor Pluggable SFP TransceiversSmall Form-Factor Pluggable SFP Installation Small Form-Factor Pluggable SFP Removal Attaching Devices Setting Up the Switch Understanding the Switch’s LEDs Power OnSystem LEDs Port LEDs System LEDs Indication SFP Cascading with Non-Overlapping Zones Cascading Switches Acceptable Single Cascade in Zones 2-12 Only Using the Web Manager Connecting to the Web ManagerE rv i e w Logging On and Off Navigation Configuring the Switch Configuration Task Location in Web ManagerResetting the Switch Setting Description System Information Settings Click Change Settings Network Settings Switching Mode Switch SpeedSwitch Identification Blocking ARB Time Settings Downloading the Switch Configuration Firmware Information Firmware Settings Event Log Messages Click Change Firmware Settings FC Switch Information FC Switch Information Detection Indication OS Information CLS 11.Ordered Set Information Page with Highlighted Zones Port Usage Information 13.Received Port Utilization Page with Highlighted Zones Value Description 15.Port Information Port Settings 16.Port Information Page with Highlighted Zones 18.Cascade Information Mode Description 19.Cascade Information Page with Highlighted Zones Switch Policy Description Policy Settings 21.Policies Change Settings 22.Overlapping Zones Zone Settings 25.Overlapping Zone 1 Information Overlapping Zones Non-Overlapping Zones 26.Overlapping Zone 1 Information Configuration Click Back to Non-overlapping Zone Info to view the changes Management Connecting to the CLI Using the Command Line Interface CLI Noz Configuration Task CLI Command Changing the Switch’s IP Parameters Configuring Switch InformationEnabling or Disabling Dhcp Requests Downloading New Firmware Managing the Firmware Message Action Edit Trap Destination Menu Active Value NEW Value Configuring the Trap Destination Table Option Description Viewing Management, Policy, and Threshold Settings Changing the CLI/Web Password Policy Description Policies Threshold Information Settings Description Action Description Actions Command Description Changing the Switching Mode Number. You can also change the port policies PLL Displaying Ports Enables you to configure control of the port. Select from Resetting the Hardware Resetting the SwitchResetting the Switch to Factory Default Settings Viewing the Event Log Changing the Switch’s Operating Speed Overlapping Zoning ConfigurationViewing and Understanding Zoning Information Example noz 25,6,7,8 39,10 Non-Overlapping Zoning Configuration Technical Support Reference Tro ub l e sh oo ti n g Fibre Channel References Small Form-Factor Pluggable SFP Issues Appendixes Specification s Appendix a Specifications Vixel Model 335 Operating Conditions Operating Conditions Console Commands CommandsGeneral Commands Browse Commands Show Zone Action Commands URL Event Meaning Action Severity Message Appendix C Event Messages Appendix C Event Messages Vixel Model 335 Installation & Configuration Guide Vixel Model 335 Installation & Configuration Guide Cross References Appendix E Glossary Scsi Index Configuring switch information Index