Paging Priority

When using the standard paging functions, paging is not heard while other calls are in progress.

Using paging priority:

1. Dial

(zones: 1—9, all-call: 0),

(zones: 01—31, all-call: 00), or

(combination zones: 90—99).

When the station being paged is already on the line, the call is interrupted. And the calling party is put on hold while the paging message is delivered. Refer to Example 1.

2.The calling party will be restored after the paging message is finished and his original conversation may be resumed. *

3.If the person paged wishes to respond immediately, he should dial

or hang up a handset

to terminate his original conversation and then dial

(zone paging or combination paging response) or

or

(all-call response).

*: Conversation made at a station with its Privacy switch in ON is not resumed once interrupted. (The EXES-6000 System permits the station in Privacy made to make or receive a call.)

Note 1: If the station called is in the process of dialing when station paging is initiative, paging will not

be heard at that station and the call can be com- pleted without interference.

Note 2: If a station being paged with station paging is

called by a third party, camp-on-busy will result. Refer to Example 2.

Note 3: If any station in a given zone (zone 1, for example) pages another zone (zone 2, for example), station paging to stations in zone 1 results in camp-on- busy. Refer to Example 3.

Note 4: If station paging priority is used, the station num-

bers within the zone area must be programmed

at station No. 200.

(1)To determine areas where conversation is in- terrupted by station paging prionity.

(2)To determine zones to permit automatic response to zone paging from the paged station. (See Note 2 of Paging.)

Note 5: when system incoporates Station paging and PA

paging at the same time, employ the Zone number

dialing method (

) for dial operation

made when responding to the page. Also, set up "Station No. 200 programming" for Station paging priority. If the Automatic responding method

is employed, then "No. 200 programming" need to be set up for every station and conversation

is interrupted each time the External PA paging is

made.

< Example 1 >

< Example 2 >

< Example 3 >

Programming for Example 1, 2 and 3

– 47 –

Page 50
Image 50
Vizio EXES-6000 CP-64 Paging Priority, Zones 01-31, all-call 00, or, Dialing method For dial operation, Made