Selectable Calling Tone

Tie-line

The duration of the calling tone can be set for either 0.2

second (single note tone) or 0.3 second (warble tone).

It is also possible to have the station without any calling tone.

Note.

1.The duration of the continuous calling tone is im- possible to change.

2.Different modes of the duration of the calling tone may not be employed in each station within the same system.

Selectable Paging Pre-Announcement Tone Duration

The duration of the all-call and zone paging tones can be set for either 2 seconds ("long") or 1 second ("short"). It is also possible to have the system without any paging pre-announcement tone.

Time-Out of Conversation

It is possible to limit the conversation duration to one through ninty-nine minutes in the unit of one minute in

order to improve speech path availability. A hurry-up

tone is sounded in both the calling and called stations approximately 10 seconds before the busy stations are automatically disconnected from the speech path.

Time-Out of Paging Call

This function is employed to prevent the unnecessary line occupation as a result of a paging party's failure to

depress the key after a paging call establishment. The paging call is automatically cancelled after a certain period of time, which may be set at one through ninty- nine minutes in the unit of one minute, with a hurry-up tone transmitted to the paging station approximately 10 seconds prior to the automatic disconnection. When the paged party responds, the conversation is automatically cut off after the duration set by the Time-out of con- versation function.

– 90 –

Page 94
Image 94
Vizio EXES-6000 CP-64 operating instructions Selectable Calling Tone, Second single note tone or 0.3 second warble tone