Pocket Pager

The system can be connected with usual type Pocket pager using the interface with Make/break relay output.

1. Dial

(00 ~ 99, Pager No.)

and the pager is called after confirmation tone is heard.

2. When

(00 ~ 99, Pager No.)

is dialed by the party called from the nearest master station, it is possible to respond a call to the station.

Note.

1.Once a receiver is called from one station and a response is waited for, camp-on-busy will result for other callers. But, if a response to the call is not received within 3 minutes, the terminal can be called from a new calling station.

2.If the pager is called after confirmation tone is heard, a calling station is disconnected from the speech line and waits for a response while the relay for pager transmission is kept in the Make position till a response is made. The station which waits for a response can be called from the other stations.

3.The other stations can call the other pagers while one station makes a call and is waiting for a response.

4.Dialing (pager number that is called) cancells calling the pager if the wrong number has been pressed.

5.When the exchanges are connected by tie-lines, it is only possible to call the pager from the stations con- nected to the exchange "A" for stations No. 200 through 455. A pager response can be made from any station.

Pager transmitter

Pager call

Pager receiving call

Response call

Response

(From the nearest station)

– 57 –

Page 60
Image 60
Vizio EXES-6000 CP-64 operating instructions Pocket Pager, Dial