Vizio EXES-6000 CP-64 Selectable output type indication panel Condition No Unit No

General Purpose Control

Station may be restricted from access to this function. This function can control other equipments by employing the Data Transmitting and Receiving Units.

Select the required type of output.

(Mode 1) One-shot make output (500/50 contacts)

Dial

and the relay output is made for 1 to 2 seconds.

Example: Door remote and VTR control

Note: Operation performed even when all link circuits are occupied.

(Mode 2) Make/break output (512/100 contacts) Dial

and the make output is sent out. Dial

and the break output sent out.

Example: In/out annunciation, Prescription annunciation.

(Mode 3) 8-selectable one-shot make output (9 units) Dial

Unit No. Contact No.

and one contact out of 8 selectable make outputs is

obtained for about 1 or 2 seconds. Example: VTR control

(Mode 4) 8 selectable make output and/or decimal output

(A)8 selectable make output (64/9 units) Dial

Condition No.

Unit No.

and one of the 8 relay outputs is made. "Clear" opera

tion makes all 8 relays break.

Example: Destination indication, room condition indication, ITV control

(B)Decimal output Dial

Tie-line

Door remote control

Fig. 1 Control with one-shot make output

Fig. 2 Lamp on/off indication panel

Fig. 3 VTR control with 8-selectable one-shot make output

Fig. 4 8 selectable output type indication panel

Condition No.

Unit No.

and the condition is indicated numerically. Example: Destination indication, room condition

(Mode 5) 4 decimal digits output Dial

Unit No. 4 decimal digits

and 4 decimal digits are indicated.

Example: Prescription annunciation

Fig. 5 Decimal output type indication panel

Fig. 6 4 decimal digits type indication panel

– 95 –