Remote Response
This feature is available only among stat ions programmed
for this purpose. When a station at which no one is present
is called by means of a continuous ca lling tone, remote
response to that cal l can be made by pressing the key
from any other station programmed for this function.
Dial operation for Remote response
Note.
1. This function is only possible when a station is called
by a continuous calling tone.
2. When this func tion is used f rom a station wit h t he
Privacy switch ON, press the key, after lifting
a station handset or after shifting the Privacy switch
to
OFF.
Programming the remote response group
Establish the remote response group of stations and
designate a specific station within the group as a tem-
porary "Master station" and the rest as "Substations".
Note.
Make sure that the temporarily disignated master
always registers his own station number at time of
programming.
Cancelling remote response program
Touch dialing at each "Substation"
His own Substation number
cancells the Remote reponse program.
Note.
When 2 or 3 exchanges are connected by tie-line, select
the Remo te response group wi thin the stations connect-
ed to the same exchange.
Calling
No.209
Remote response group
Conversation after Remote response
Remote response group
Programming the remote response group (Example)
Remote response group
Tie-line
Calling tone
Station
No.201
No. 203
No.209
Conversation
Station
No.201
No. 203
Station
No. 201
Station
No. 204
Station
No. 203
Station
No. 202
The Master station registers the number of his own
station as follows.
Master's number
Each of "Substation" within the group registers the
"Master" 's number by dialing
Master's number
– 74 –