Vizio EXES-6000 CP-64 Persons, Pager Calling and Response, Optional Functions

3.Optional Functions

27)Station Paging and Response (PI-62 Unit is required) Paging is available through the built-in station speakers. Paging calls can be responded to by the nearest master station.

28)Paging Priovity and Response (PI-62 Unit is required) Conversation may be interrupted temporarily to accept the priority station paging.

29)Combination Paging and Response

(PI-62 Unit is required)

Combination paging zones which cover 2 or more

independent paging zones is allowed in the system.

30)Paging during Normal Call

Calls can be transferred to a third party after paging while speaking.

31)Personal Number Paging

Zone paging is made by Personal Numbers when Personal Numbers are registered into any designated station within a zone.

32)PA Paging and Response

(PI-62 Unit and PA System are required) Paging through PA System and response.

33)Emergency All-Call Paging (PI-62 Unit is required) Top priority of all-call paging is available from one specified station.

34)Conference (CL-62 Unit is required)

Conference calls can be made including up to 4

persons.

35)Press-to-Talk Control (PI-62 is required)

The operation of Press-to-Talk activates Relay Out- puts, thus controlling Door-Lock and Radio Trans- mitting Equipment.

36)In/Out Annunciation

(Interface for the Indicator Board needs to be made by using Data Transmitter DT E11 and Receiver DR- B61)

In or Out status is annunciated by registration/ cancellation of Personal Numbers.

37)Destination Annunciation Indication

(Interface for the Indicator Board is to be made by using Data Transmitter DT-E11 and Reciver DR-B61.) Personal number registered stations are indicated.

38)Calling Party Indication [Lamp Type]

(Interface for the Indicator Board is made by using Data Transmitter DT-E11 and Receiver DR-B61.) One lamp for one calling station. This can memorize the station numbers of stations which put through calls to stations in the privacy or busy modes.

39)Calling Party Indication [7-SEG Display Type] (Interface for the Indicator Board is made by using Data Transmitter DT-E11 and Receiver DR-B61.)

A numerical type calling party indication panel can be provided at certain specified stations.

40)Pager Calling and Response

(Interface is accomplished by using Data Transmitter DT-E11 and Receiver DR-B61)

Pagers with relay input interface can be connected.

41)General Purpose Control

(Make the Indicator Board and General Purpose Control Interface by using Data Transmitter DT-E11 and Receiver DR-B61)

Various types of Relay Output modes for control are available. Use as Remote Control for such applica- tions as In/Out Annunciation, Destination Annuncia- tion Indication, VTR and ITV.

42)Simplified Paging

Simplfied PA paging is possible if an external speaker is connected instead of a station.

– 20 –