Vizio EXES-6000 CP-64 operating instructions EXES-6000, CP-64 Summary of Dial Operations, 1000 ~

EXES-6000, CP-64 Summary of Dial Operations

Tie-line system of 2 or 3 exchanges

Station numbering: No. 200 ~ 455, No. 470 ~ 725, No. 740 ~ 995 (standard)

Classification	Function	Dial operation	Number
	Press-to-talk	Simplex	Duplex
	Remote response

Tie-line

Description

Conversation is simplex when PTT bar is used.

When a station is called by continuous calling tone, near station in the groups can respond the call instead of the called station.

	Remote response registration
	Continuous calling tone response
	Privacy
	Secretary transfer
	Single digit registration
Call	Single digit dialing
	Personal number registration
	In/Out annunciation-lamp ON
	Personal number cancellation
	In/Out annunciation-lamp OFF
	Personal number call
	Conference
	Conference clear
	Highest executive priority
	Call transfer

Confirmation tone

Secretary transfer off

Registration dials (maximum 4 digits)

Confirmation tone

Confirmation tone

CallingCalling

Busy tone

	Transfer
Call conversation	Conversationwith
	original station

Station No.

1000 ~ 1999

Station No., Personal No., Single digit number

Station No., Personal No.,

Single digit number

Group registration of stations can be made from each station.

Called party touches one of these keys then conversation may begin.

When a party does not wish to accept incom-

ming calls, set the Privacy Switch in the ON

position.

This function allows for automatic transfer of calls to a secretary when desired.

This function allows for single digit registration of up to 4 digits among the numbers 0 through 9 and the key.

Registered dial code may be automatically

dialed.

Personal number may be resistered at any master station which the person to whom the number is assigned expects to be.

When anyone having a personal number leaves the office he merely cancels the programming of his personal number.

A personal number dialing enables the station

call for a person having the personal number.

A conference call may be made with up to 4 persons. Participants must be called individually.

If a person called into a conference is absent, the conference may be returned to the original condition.

When the called party is busy, this function allows interruption of the existing conversation and immediate direct contact with the called Party.

The called party can transfer the call to a selected other station (by station number, personal number or single digit number).

– 66 –