Paging during Normal Calls

A paging call can be made by a called party of an existing

call to a third party, the third party's response accepted

while the original call is on hold, and the original call

resumed when the response call has ended.

Press

and the desired zone number. This puts the original call on hold and makes the External PA and or Station paging call. Then, press

Conversation

Calling party

Called party

 

to restore the original call, and wait for the response to the paging call. When the response is received, press

On hold

Station paging

or replace the handset and the original call goes back on

hold allowing the second call to the taken. When the second

call is completed, press

and the original call can be resumed.

Note.

1.With adoption of the selective functions "Call Trans- fer" and "Paging", this function is allowed to activate.

2.When 2 or 3 exchanges are connected by tie-line, paging during a normal call is only possible within the paging zones allocated to the exchange to which a station making the paging is connected. And All-call paging during a normal call is impossible.

Group Hunting

When the party you are calling is on another line, your call is automatically rerouted to another station which is pro- grammed from the beginning.

When the party to whom the call is rerouted is also on

another line, the call can further be rerouted to the other

station by programming.

Note.

1.To use this function, station No.200 programming of the station number(s) to which the call is to be trans- ferred must be set up in the exchange. Place a DIP switch for Group Hunting in the ON position and make Group Hunting programming, so that this func- tion can be programmed.

2.The combined use of this function with the "Secretary Transfer" function makes the system more functional. When "Secretary Transfer" function is employed, setting the Privacy switch to the ON position allows any incoming call to be automatically transferred to the other stations even when one is absent.

3.If station No. 200 programming is made so that the call can be rerouted to the station which is called first when the other stations registered are busy, then any call can be transferred automatically to another station.

Similarly, the original call can be rerouted one after another in the "Secretary Transfer".

4.When 2 or 3 exchanges are connected by tie-line, select the station to which the call is to be transferred within the same exchange group.

External PA paging

Resuming

the original call

– 32 –

Page 35
Image 35
Vizio EXES-6000 CP-64 operating instructions Paging during Normal Calls, Group Hunting