Black & Decker B1650 manual How To Use Your Breadmaker

How To Use Your Breadmaker

5 Close the lid and plug into an outlet (120 volt). Two ARROWS will come up in the display window indi- cating BASIC BREAD TYPE with a REGULAR crust and

12:00 AM will flash in the display window. If you wish to use the TIMER to delay baking, you will first have to set the correct time of day. However, if you want to start the breadmaking operation now, it is not neces- sary to set the CLOCK.

6 To bake a Basic loaf of bread with a Regular Crust, simply press the START/RESET Button.

However, you can choose a different setting for your

recipe by pressing the BREAD TYPE button

on the pad. Each time

you press BREAD TYPE, the

arrow in the display window will point

to the next selection (i.e. Rapid Bake, Sweet

Bread, etc.) If you are using a recipe that calls for the

Basic, Rapid Bake, or Sweet Bread setting, choose a

crust color by pressing the CRUST COLOR button until the arrow in the window lines up with either “Regular” or “Dark.”

7 Press the START/RESET Button once until it beeps and the red “on” indicator light comes on.

The flashing 12:00 AM will be replaced by, for exam- ple, 3:50, if you chose a recipe for the Basic Bread set- ting (regardless of whether you chose “Regular” or

“Dark” crust). It will count down the remaining time in one-minute intervals

(3:49, 3:48, etc.) until the bread is done. When the baking is complete, several beeps will sound to alert you that the bread is ready and the red indicator light will begin flashing. In addition, a flashing 12:00 AM will reappear in the display screen.

8 This Breadmaker is designed with a KeepWarm function that automatically begins when baking

is complete. The red light will continue to flash for up to 60 minutes after baking is complete and will keep bread warm during that time. At the end of the hour, the KeepWarm cycle will end and the light will remain on constantly, indicating the unit is still plugged in. The bread should then be removed as soon as possible to avoid getting soggy. You may remove the Baking Pan any time during the Keep Warm cycle. To turn off the KeepWarm feature before the 60 minutes are up, simply press the START/RESET button and hold it until the display time clears.

NOTE: The Keep Warm feature does not function for the DOUGH/PASTA setting since baking is not involved in this program. If you leave finished dough in the unit over a period of time, it may over-rise and produce poor results. For best results, remove dough at the end of the program and follow the recipe directions for shaping, rising, and baking.

9 This unit has a convenient Viewing Window so that you may watch the progress of the bread as

it is mixed, kneaded, and baked. Occasionally, some moisture may form in the window during the rising cycle. If moisture forms, you may lift the lid to look inside during the mixing and kneading stages, however, DO NOT OPEN THE LID DURING THE BAKING CYCLE (approximately the last hour or during the Super Rapid Bake setting) as this may cause the bread to underbake. Most of the moisture should disappear during the baking cycle.

10 To remove the Baking Pan, use pot holders or oven mitts, grasp the wire handle with both

hands and turn the Pan to the left until the notch in the pan lines up with the unlock arrow on the back wall of the oven chamber. Pull straight up on the Baking Pan. Fold and lock the wire handle down. Turn the pan on its side and gently shake the bread

9