Wayne-Dalton 9600 Attaching Disconnect Cables, Mounting Disconnect, Handle Bracket

26

Tools Needed:

Pliers

Attaching Disconnect Cables

NOTE: See idrive® main installation and owners manual for idrive® parts.

Attach the loose disconnect cable (located in opener hardware bag) to the opener with the “S” hook. Close both ends of the “S” hook (with pliers) to lock assembly together.

Thread the disconnect cable (behind the counterbalance cable) through the hole in the right hand end bracket; remove all slack between opener and right end bracket.

	S-Hook
	Disconnect
	Cable
	Hole in Right
	End Bracket
Right Side of
End Bracket
Hole in	Close “S” Hook
End Bracket

27	Mounting Disconnect
	Handle Bracket
Tools Needed:	NOTE: See idrive® main installation and
Pencil
	owners manual for idrive® parts.
Tape measure	Mark a location on the right jamb, 6
1/8” Drill Bit
	feet above the floor to mount the
7/16” Socket	disconnect handle bracket.
Driver	Drill 1/8” pilot holes for the lag screws.
Power Drill

Align top of the bracket with the mark. Fasten bracket to the jamb with

(2) 1/4” x 1-1/2" lag screws.

6ft

(2) 1/4” x 1-1/2” Lag Screws

Disconnect

Handle Bracket

26

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com