Switch On the Machine
Once the machine has been assembled it must be configured. This is done using the Product Enablement Key when the machine is switched on for the first time.
The Product Enablement Key is delivered in a plastic tube inside the box with the machine. The procedure to configure the machine is as follows:
1Locate the tube containing the
Product Enablement Key. Remove the plastic card and carefully press out the key.
2Connect the Power cord to the machine and a suitable power supply outlet.
3Switch on the machine.
4Install the Product Enablement Key into the Card Reader Slot at the back of the machine.
5
6
7
8
Card Reader slot
Green LED
The Language Default screen will be displayed. Select your chosen language and then select Save.
The Installation Wizard screen will be displayed. Select Next.
The Product Enablement Settings screen will be displayed. Follow the instructions on the screen.
NOTE: When the Green LED light stops blinking and remains on continuously (about 10 seconds), the configuration is successful.
Remove the Product Enablement Key and select Next on the display.
quick use guide | 5 |
