Transmitting Documents

Direct Send with Memory Send Selected

When free memory becomes 0% due to many job reservations, a Direct Send transmission can be performed manually even when the default transmission mode is set to “Memory Send” (see “Memory Send or Direct Send Default Mode” earlier in this Chapter).

Note: If Direct Send is enabled, the document remains in the Document Support until the document is transmitted.

To manually perform a Direct Send transmission:

1.Load the document face down in the Document Support.

2.Select the desired Resolution and Contrast.

3.Press:

Direct

Send

Direct send

1.Yes

2.No

4. Press

to send the document.

To return to the Standby Mode without sending the document,

press .

Jan-31 02:23pm 80%

Enter fax number

Note: You can select another option for this job. Refer to the selected option for the procedure.

5.Using one of the dialing methods, enter the fax number and press Enter, if needed.

The machine assigns, dials the number and transmits the pages as they are scanned.

WorkCentre Pro 555/575

5-7

Page 111
Image 111
Xerox 575, 555 manual Direct Send with Memory Send Selected, Direct send Yes, Jan-31 0223pm 80% Enter fax number