Programming the Machine

To program a Menu feature using the scroll keys:

1. From the Standby Mode, press:

Menu

Menu map

1.Fax features

2.Using the and arrow keys, scroll through the list until the feature you wish to program is displayed, then press the

Enter key.

3.The next menu layer is displayed. Using the and arrow keys, scroll through the list until the feature you wish to

program is displayed, then press the Enter key.

To program a Menu feature using the Menu Numbers:

Most Menu features are assigned a sequence number. You can select the feature you wish to program quickly by pressing Menu and the sequence numbers.

Refer to the Menu Flow Map on the pages that follow, or to print a Menu Map, press Menu, 7. Menu map can also be printed by a direct access key.

Locate the feature you wish to program on the Menu Map and note the number sequence.

For example: The Machine ID feature is accessed by first selecting Initial Setup (4), then Machine ID (3).

Therefore, to access this menu item, press:

Menu

Note: Double digit menu numbers (01. Speaker volume)

require 2 entries and are shown as 0 1

WorkCentre Pro 555/575

2-3

Page 21
Image 21
Xerox 575, 555 manual To program a Menu feature using the scroll keys, Menu map Fax features