Transmitting Documents

Direct Send

When the Direct Send default transmission mode is selected, the machine first dials the remote fax machine and confirms the connection. When the connection is confirmed the machine sends each document page as it is scanned.

To send a single transmission in Direct Send Mode, refer to the “Direct Send with Memory Send Selected” procedure that follows.

To send a document using the Direct Send mode as the default transmission mode:

1. Load the document face down in the Document Support.

Jan-31 02:23pm 100%

Auto answer

2. Select the desired Resolution and Contrast.

Note: You may select another option for this job. Refer to the selected option for the procedure.

3.Using one of the dialing methods, dial the fax number and press Start, if necessary. (See Chapter 4, “Dialing Methods”.)

Dialing

5551212

Communicating P001 5551212

Sending P001 5551212

The machine assigns, dials the number and scans the pages as they are transmitted.

5-6

WorkCentre Pro 555/575

Page 110
Image 110
Xerox 575 manual Direct Send, Dialing 5551212 Communicating P001 Sending P001