The steps are:
1.Connect your PC to the switch console port via PC COM port.
2.Start the console management and select Update Firmware com- mand.
Waiting for program Download for EPROM ......
This message indicates the switch is ready to receive file from console port.
3.Execute the utility program SFTP.EXE from your DOS window. The command syntax is:
C:\WINDOWS>SFTP n filename <Enter> n: 1=COM1 2=COM2
filename: the file name of the new firmware
The prompts shown on DOS screen are as follows:
C:\WINDOWS>SFTP | 1 | image.bin |
| |||
+ |
|
|
| + | ||
Down | Load | Program | .......... | |||
Usage: sftp | 1[/2] | <filename> | ||||
(Default: | COM1,38400,8 | Data, 1 Stop, | NoParity) | |||
+ |
|
|
| + | ||
$Inputfile | name | : | image.bin |
| ||
$Need to change communication parameters?[Y/n]n
Transferring image.bin (xxx bytes) to ....
.....
Data Transfer Finished.
C:\WINDOWS>
