Specifications

Specifications

AUDIO SECTION

Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.06% THD, 8

.................................... 105 W

• Dynamic Power (IHF)

 

Front L/R, 8/6/4/2

140/175/205/250 W

• Maximum Output Power

Speaker impedance setting: 81 kHz, 0.7% THD, 4

155 W

• IEC Output Power

 

Front L/R, 1 kHz, 0.06% THD, 8

115 W

• Damping Factor (IHF)

Front L/R, SPEAKERS A, 20 Hz to 20 kHz, 8

.................................................................................

120 or more

• Input Sensitivity/Input.........................................................Impedance

3.5 mV/47 k

PHONO (MM)

CD, etc

200 mV/47 k

MULTI CH INPUT

200 mV/47 k

• Maximum Input Voltage

 

PHONO (MM)

 

1 kHz, 0.1% THD

60 mV or more

CD, etc.

 

Effect On, 1 kHz, 0.5% THD

2.3 V or more

• Rated Output Voltage/Output...........................................................Impedance

200 mV/1.2 k

OUT (REC)

PRE OUT

1.0 V/1.2 k

SUBWOOFER (2ch Stereo, FRONT SP: SMALL)

................................................................................

1.0 V/1.2 k

• Headphone Jack Rated Output/Impedance

 

CD, etc. (1 kHz, 50 mV, 8 )

150 mV/100

• Frequency Response

 

CD to Front L/R, 10 Hz to 100 kHz

 

......................................................................................

+0/–3 dB

• RIAA Equalization Deviation

 

PHONO (MM)

0 ± 0.5 dB

• Total Harmonic Distortion

 

PHONO (MM) to OUT (REC)

 

20 Hz to 20 kHz, 1 V

0.02% or less

CD, etc. to Front L/R

 

2ch Stereo, 20 Hz to 20 kHz, 50 W, 8

0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

PHONO (MM, 5 mV) to OUT (REC)

 

.............................................................................

81 dB or more

CD, etc. (Effect Off, 250 mV) to Front L/R

 

...........................................................................

100 dB or more

• Residual Noise (IHF-A Network)

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

PHONO (shortened) to Front L/R

60 dB/55 dB or more

CD, etc. (5.1 kshortened) to Front L/RZ ....

60 dB/45 dB or more

• Volume Control

MUTE/–80 dB to 16.5 dB

• Tone Control (Front L/R)

 

BASS Boost/Cut

±10 dB/50 Hz

BASS Turnover Frequency

350 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

TREBLE Turnover Frequency

3.5 kHz

Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP, SUR.B L/R SP:

SMALL/SML)

12 dB/oct.

L.P.F. (Subwoofer)

24 dB/oct.

VIDEO SECTION

• Video Format (Gray Back)

...............................................................................................

PAL

• Video Format (Video Conversion)

................................. NTSC/PAL

• Signal Level

 

1 Vp-p/75

Composite

S-video

1 Vp-p/75 (Y), 0.286 Vp-p/75 (C)

Component

1 Vp-p/75 (Y), 0.7 Vp-p/75 (PB/PR)

• Maximum Input Level (Video Conversion Off)

............................................................................... 1.5 Vp-p or more

• Signal to Noise Ratio

.................................................................................... 50 dB or more

Frequency Response (MONITOR OUT) Component (Video Conversion Off)

................................................................

5 Hz to 60 MHz, –3 dB

GENERAL

 

• Power Supply

AC 230 V, 50 Hz

• Power Consumption

440 W

• Standby Power Consumption

0.1 W or less

• AC Outlet

1 (100 W maximum)

• Dimensions (W x H x D)

435 x 171 x 421 mm

 

(17-1/8 x 6-3/4 x 15-1/2 in)

• Weight

13.1 kg (28 lbs 14 oz)

* Specifications are subject to change without notice.

INFORMATION

ADDITIONAL

 

 

English

103 En

Page 105
Image 105
Yamaha DSP-AX861SE owner manual Specifications, 103 En, Audio Section, Video Section, General