Yamaha DSP-AX861SE 9 En, Using the other SCENE buttons, Check the type of the connected speakers

Models: DSP-AX861SE

1 117
Download 117 pages 33.39 Kb
Page 11
Image 11
Check the type of the connected speakers.

Step 3: Turn on the power and press SCENE 1 button

Check the type of the connected speakers.

If the speakers are 6 ohm speakers, set “SP IMP.” to “6MIN” before using this unit (see page 25). 4 ohm speakers can be also used as the front speakers (see page 90).

1Turn on the video monitor connected to this unit.

2Press 3SCENE1 button.

“DVD MOVIE VIEWING” appears in the front panel display, and this unit automatically optimize own status for the DVD playback.

y

The indicator on the selected SCENE button lights up while this unit is in the SCENE mode.

3Start playback of the desired DVD on your player.

y

If the connected DVD player is a Yamaha product and has capability of the SCENE control signals with the REMOTE OUT jack of this unit (see page 23), this unit can automatically activate the DVD player and start playback when you press the 3SCENE1 button. Refer to the instruction manual of the DVD player for further information.

Quick start guide

4Rotate 4VOLUME to adjust the volume.

Note

When you change the input source or sound field program, the SCENE mode is deactivated, and the indicator on the selected SCENE button turns off.

Using the other SCENE buttons

In the following cases, try pressing the corresponding SCENE button to enjoy the playback of the desired sources.

Case A: “I want to listen to a music disc from the connected DVD player...”

1Turn on the video monitor connected to this unit. Press 3SCENE2 (or

ASCENE2) to select “Music Disc Listening”.

Case B: “I want to watch a TV program...”

2Press 3SCENE1 button. Press 3SCENE3 (or

ASCENE3) to select “TV Viewing”.

Note

To use the “TV Viewing” template (Case B), you must connect a satellite receiver, a cable TV receiver or an HDTV decoder to this unit in advance. See page 20 for details.

Case C: “I want to listen to a music program of the FM/AM/DAB radio station...”

3Start playback of the desired DVD on your player. Press 3SCENE4 (or

ASCENE4) to select “Radio Listening”.

Note

To use the “Radio Listening” template (Case C), you must connect an FM/AM/DAB tuner to this unit in advance. See page 21 for details.

y

If you cannot find the desired situation, you can select and change the assigned SCENE template for the SCENE buttons. See page 33 for details.

INTRODUCTION

English

9 En

Page 11
Image 11
Yamaha DSP-AX861SE 9 En, Using the other SCENE buttons, Check the type of the connected speakers, 2Press 3SCENE1 button