Enjoying multi-channel sources in 2-channel stereo
You can mix down
Press USTEREO on the remote control repeatedly to select “2ch Stereo”.
y
•You can use a subwoofer with this program when “LFE/BASS OUT” is set to “SWFR” or “BOTH” (see page 66).
•You can also select the “2ch Stereo” mode by rotating the 6PROGRAM selector on the front panel.
•See page 58 for details about the parameters of the “2ch Stereo” mode.
Selecting the night listening mode
The night listening modes are designed to improve listenability at lower volumes or at night.
1Press WNIGHT on the remote control repeatedly to select “NIGHT:CINEMA” or “NIGHT:MUSIC”.
Choices: NIGHT:CINEMA, NIGHT:MUSIC, OFF
•Select “NIGHT:CINEMA” when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes.
•Select “NIGHT:MUSIC” when listening to music sources to preserve
•Select “OFF” if you do not want to use this feature.
y
When a night listening mode is selected, the NIGHT indicator lights up in the front panel display.
2Press Dl / h to adjust the effect level while “NIGHT:CINEMA” or “NIGHT:MUSIC” is displayed in the front panel display.
Effect.Lvl:MID
Choices: MIN, MID, MAX
•Select “MIN” for minimum compression.
•Select “MID” for standard compression.
•Select “MAX” for maximum compression.
y
“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored independently.
Using audio features
Notes
•You cannot use the night listening modes in the following cases:
INPUT jacks is selected as the input source (see page 38).
•The night listening modes may vary in effectiveness depending on the input source and surround sound settings you use.
OPERATION | BASIC |
|
|
English
