■Selecting a component to be controlled
You can select a component to be controlled independently of the input source selected with the input selector buttons.
Press JSELECT k / n repeatedly to select the desired component.
The name of the component to be controlled appears in the display window (J) on the remote control.
SELECT
■Controlling optional components
(Option mode)
“OPTN” is an optional component control area that can be programmed with remote control functions independently from any input source. This area is useful for programming commands that are to be used only as a part of a macro function or for components that do not have a valid remote control code.
To select the option mode, press JSELECT k / n repeatedly until “OPTN” appears in the display window (J) on the remote control.
SELECT
Note
You cannot set a remote control code for the optional area. See page 81 to program buttons operated within this component control area.
Remote control features
Setting remote control codes
You can control other components by setting the appropriate remote control codes. Codes can be set up for each input area. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.
The following table shows the default component (Library: component category) and the remote control code for each input area.
Remote control code default settings
| Library |
| Default | |
Input area | (component | Manufacturer | ||
code | ||||
| category) |
| ||
|
|
| ||
|
|
|
| |
PHONO | TV | – | – | |
|
|
|
| |
MULCH CH IN | DVD | YAMAHA | 2100 | |
|
|
|
| |
| LD | YAMAHA | 2200 | |
|
|
|
| |
| TAPE | YAMAHA | 2700 | |
|
|
|
| |
TUNER | YAMAHA | 2606 | ||
DOCK | ||||
|
|
| ||
|
|
|
| |
TUNER | TUNER | YAMAHA | 2602 | |
|
|
|
| |
YAMAHA | 2400 | |||
|
|
|
| |
CD | CD | YAMAHA | 2300 | |
|
|
|
| |
DTV/CBL | TV | – | – | |
|
|
|
| |
DVR | DVR | YAMAHA | 2807 | |
|
|
|
| |
VCR | VCR | – | – | |
|
|
|
| |
DVD | DVD | YAMAHA | 2100 | |
|
|
|
|
Note
You may not be able to operate your Yamaha component even if a YAMAHA remote control code is preset as listed above.
In this case, try setting another YAMAHA remote control code.
OPERATION | ADVANCED |
|
|
1Set the operation mode selector to
LSOURCE and then press an input selector button (B), 
or 
to select the input area
you want to set up.
AMP
SOURCE
PHONO MULTI CH IN
TV | DTV/CBL | DVR | VCR | DVD |
English
