9Press Dl / h repeatedly to toggle between

9Press Dl / h repeatedly to toggle between

the setup result displays.

Press Dk / n to toggle between the parameters in results.

Results of the speaker

the setup result displays. connection and wiring

Results of the speaker distance from the listening position

Results of the setting of each speaker size

Optimizing the speaker setting for your listening room

10Press DENTER to return to the top “AUTO:RESULT” display.

AUTO:RESULT

.RESULT

SP : 3/4/0.1

DIST: 4.50/5.30m

LVL : -9.0/+6.5dB

>SET CANCEL

[select “SET” or “CANCEL”.]/[12Press DENTER to confirm your selection.]:Up/Down [ENTER]:Enter

11Make sure the pointer is pointing at “SET” and “CANCEL” and then press Dl / h to

select “SET” or “CANCEL”.

AUTO:RESULT

RESULT

SP : 3/4/0.1

DIST: 4.50/5.30m

LVL : -9.0/+6.5dB

.>SET CANCEL

[13Press NSET MENU to exit from “SET MENU”.]/[31 En]:Up/Down [ENTER]:Enter

PREPARATION

Results of the parametric equalizer of each speaker

Results of the speaker output level

y

If you are not satisfied with the results or want to manually adjust each parameter, use “MANUAL SETUP” (see page 61).

Notes

The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your subwoofer.

In the “EQ” results, different values may be set for the same frequency to provide finer adjustments.

Choices: SET, CANCEL

Select “SET” to confirm the “AUTO SETUP” results.

Select “CANCEL” to cancel the “AUTO SETUP” results.

12Press DENTER to confirm your selection.

The top “SET MENU” display appears in the OSD.

SET MENU

.;AUTO SETUP

;MANUAL SETUP

.A;SIGNAL INFO

[p]/[p]:Up/Down [ENTER]:Enter

13Press NSET MENU to exit from “SET MENU”.

14Disconnect the optimizer microphone from this unit.

The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.

y

If you change speakers, speaker positions, or the layout of your listening environment, run “AUTO SETUP” again to

recalibrate your system.

English

31 En

Page 33
Image 33
Yamaha DSP-AX861SE 31 En, 9Press Dl / h repeatedly to toggle between, the setup result displays, select “SET” or “CANCEL”