■Clearing a learned function
You can clear the function learned for a certain button in each control area.
1Set the operation mode selector to LAMP or LSOURCE and then press an input selector button (B), 
or 
to select the input area
containing the function you want to clear.
The selected component name appears in the display window (J).
AMP |
|
|
|
|
SOURCE |
|
|
|
|
TV | PHONO | MULTI CH IN |
|
|
|
|
| ||
or | TUNER | CD | ||
AMP | DTV/CBL | DVR | VCR | DVD |
|
|
|
|
SOURCE
TV
2Press TLEARN using a ballpoint pen or similar object.
“LEARN” and the selected component name
(ex. “DVD”) appear alternately in the display window (J).
LEARN
Remote control features
3Press and hold TCLEAR using a ballpoint pen or similar object and then press the button you want to clear for about 3 seconds.
“C;OK” appears in the display window (J) if
clearing was successful. Once “C;OK” appears in the display window (J) on the remote control, release
the ballpoint pen or similar object used to press TCLEAR to exit the clearing mode. The remote
control returns to the learning mode.
MODE- PTY SEEK- START
LEARN CLEAR RENAME
y
• If you continuously want to clear another function, repeat
| step 3. |
|
|
| |
| • If you continuously want to clear another function for |
| |||
| another component, press JSELECT k / n to select the |
| |||
| input area, then repeat step 3. |
| |||
| • Once you clear a learned function, the button reverts to the |
| |||
| factory setting (or to the manufacturer setting if you have |
| |||
|
| ||||
| set remote control codes). | ADVANCED OPERATION | |||
|
|
|
| ||
Notes | TLEARN again to exit. | ||||
4 | Press |
| |||
|
|
|
|
|
|
•“C;NG” appears in the display window (J) on the remote control if clearing was unsuccessful. In this case, start over from step 2.
•“ERROR” appears in the display window (J) on the remote control if you press more than one button simultaneously.
Notes
•Do not press and hold TLEARN. If you hold it down for more than 3 seconds, the remote control enters the remote control code setting mode.
•If you do not complete each of the following steps within 30 seconds, the learning mode will be automatically canceled. In this case, start over from step 2.
English
